- Type: Flat Glass Level Gauges
- Glass Material: Acrylic
- Fluid Type: Oil
- Types Of Glass: Flat Glass Level Gauge
- Material: Stainless Steel
- Application: Industrial use
- Mounting Orientation: Side
- Process Connection: Flanged
- Scale Marking: Centimeter (cm)
- Scale Material: Aluminum
- Pressure Type: Low Pressure
- Gasket: CAF
- Pressure Rating: 10~32Mpa
- Brand: Fluidyne
- Temperature: steam-saturation temperature
These flat glass level gauges are constructed with a solid forged steel bar main chamber and cover plates recessed to have perfect alignment of gaskets and glass. Though rated for #2000 psig rating, these are light weight and hence do not need any cumbersome supports for medium lengths. With special main chamber construction these gauges can be supplied up to #3000 psig rating. Main Chambers are available in forged C.S, M.S, SS304, SS316, P.P., P.V.C., FRP and Rubber lined. Gaskets are of CAF, GRAFOIL, TEFLON, NON-ASBESTOS, etc.WHY FLAT GLASS LEVL GAUGES?
You have designed your vessels with utmost care of getting the maximum economy. Also your investment on each vessel will be considerable. The return on your investment, should in no way, be hampered by defective Level gauges. Your level gauge should have the same strength as your vessel to withstand the high pressures to which it is subjected and the corrosive characteristics of the fluid. Also, your valuable process fluid should never leak out through the glass fitting, which is quite common in most of the tubular glass level gauges available in the market.
In industries, you may have to measure the levels of colorless liquids, interface of immisible fluids, liquids with sub-zero temperatures and liquids with too much foaming. All these requirements can be met with by our latest types of flat glass level gauges. FLAT GLASS LEVEL GAUGES
These gauges are constructed with a solid forged steel bar main chamber and cover plates recessed to have perfect alignment of gaskets and glass. Though rated for 2000 psig. These are light weight and hence do not need any combursome supports for medium lengths. With special main chamber construction these gauges can be supplied upto 3000 psig. Main chambers are available in C.S, M.S, SS304, SS316, P.P, P.V.C, FRP and Rubber lined. Gaskets are of CAF, GRAFOIL, TEFLON, etc. REFLEX GAUGES:
These are assembled with flat glasses with inner surfaces of reflecting prisms. Due to total internal reflection reflection liquid level shows black in contrast to a mirror-like surface above, The gauges are used for services where observation is required at a distance and on low pressure boilers. TRANSPARENT GAUGES:
These are assembled with two numbers of totally transparent toughened glasses to give a through vision of liquid levels. These gauges are recommended for interface levels, coloured fluids where colour is of interest to the process behavior and services where excessive foaming may exist. In high pressure boilers these gauges are recommended to be used with mica shields. GLASS:
Teleflo engineers continuous research, development and experimental studies on glass toughening and composition has made the tempered glasses used in these gauges most dependable providing a high strength resistant to both thermal and mechanical shocks and with the highest degree of visibility. SPECIAL LEVEL GAUGES:
Teleflo offers level gauges for every kind of application in the process industry and the following are very widely used. Apart from the types detailed below Teleflo can offer level gauges with rubber lining, lead bonding, steam traced and also with Boiler Inspector Certificates. Teleflo has already supplied to leading Indian Industries number of Boiler level gauges and are now planning a standardization of the centre to centre distance of gauges used in Boiler in this country.