Safety Relief Valves

• Usage/Application: Industrial
• Pressure: Medium Pressure
• Valve Size: 25 mm
• Material: Mild Steel
• Media: Gas

FLUIDYNE Backpressure Safety Relief or Surplus or Diaphragm Assisted Safety Relief Valve is single seated, diaphragm controlled and spring regulated valve where the pressure of the system being relieved, acting upon the diaphragm provides a sensitive control of the valve opening in accordance with the regulating spring setting. The application or ideal for installations where a direct spring loaded type is too insensitive to pressure or flow changes. The Fluidyne Backpressure Relief Valve Protects systems from overpressure and Monitors pump outputs. Fluidyne Backpressure Relief Valve is most suitable for water, air, gas, steam, oil or chemical services.

• Material: MS
• Usage/Application: Industrial
• Pressure: 5 Bar
• Finish: Color Coated
• Temperature: 120 Deg C

Fluidyne Boiler Full Lift Full Flow Safety Relief Valve is a high performance valve designed and developed for steam and water service. It can also be used for most other applications like gases and vapors, saturated steam, superheated steam. Fluidyne Safety Relief Valve is designed for steam service. The valves are designed as per API 520, API 526 and meets the requirements of ASME Sec VIII-Division I. Fluidyne Boiler Safety Valves are offered with IBR Certification in Form III-C. The valves have a full nozzle or half nozzle and guided at the guide of the valve body, increasing the eficiency of the valve assembly. Specially designed disc holder ensures full lift within 5% to 10% overpressure or increase of pressure above the set pressure value. Blow down of a maximum of 5% to 10% is achieved in this design. Lapping of valve seat to optical flatness ensures leak tightness at seat. Full lift of valve disc ensures that the certified flow of the safety valve is discharged. Spring made of chrome vanadium steel is precisely selected and assembled so that the valve operates precisely and a good leak tightness is achieved at high temperatures with great repeatability.

• Material: MS
• Usage/Application: Industrial
• Pressure: 5 Bar
• Finish: Color Coated
• Temperature: 120 Deg C

Fluidyne Deadweight Safety valve consists of a valve seat where the pressure in the boiler or pressure vessel when it exceeds the normal working pressure lifts the valve seat with its weight. The excess pressure fluid therefore escapes through the pipe to the atmosphere, until the pressure reaches its normal value. It is the simplest type of safety valve; it is suitable for stationary boilers and pressure vessels only, because it cannot withstand the jerks and vibration of mobile boilers or pressure vessels. Another disadvantage of this valve is the heavy weight required to balance the pressure. Hence, it is not suitable for high pressure boilers.

• Usage/Application: Industrial
• Pressure: Medium Pressure
• Valve Size: 15 mm
• Material: Mild Steel
• Media: Water

Fluidyne manufactured Safety Valves and Safety Relief Valves, Thermal Relief Valves, Boiler Safety Valves, Dead weight Safety and Relief Valves, Pilot operated Safety Relief Valve conform to API, ASME and IBR codes. Fluidyne carried out an extensive market research to design and manufacture durable and effective Safety Valves and Safety Relief Valves that are highly suitable for most chemical, petrochemical, oil, pharmaceutical, fertilizer, power and engineering industries and more. These industrial safety relief valves, flanged safety relief valves, dead weight relief valves, sanitary safety relief valves are high reliability and are approved by factory inspectors, inspectors under Indian Boiler Regulation (IBR), B.V., Lloyds and Chief Controller of Explosives. FLUIDYNE safety and relief valves are in used in above industries for over 35 years. Fluidyne Safety Valves and Safety Relief Valves are Full Lift, 'Pop' action type, Full Nozzle or half nozzle having Screwed Butt/Socket weld or Flanged connections. Various Models are available as per requirements of customers. Sizes Range : ¼”(6 NB) to 12” (300 NB). All API standard Orifice sizes are available. Both Angle and Straight (in-line) Patterns are available. Inverted-Bottom spring mounted types available for mounting inside mobile pressure vessels. Connection offered are Screwed, Sanitary or Socket Weld / Butt Weld ends and Flanged ends to 150#, 300#, 600#, 900#, 1500# and 2500# rating. Flanged connections are offered with FF, R/F and RTJ ends to ANSI B16.5, BS, DIN,. Safety Valves and Safety Relief Valves are manufactured from castings and by fabrication from bar stock and all special trims provided as per customer requirements. Fluidyne manufactured Safety Valves and Safety Relief Valves, Thermal Relief Valves, Boiler Safety Valves, Dead weight Safety and Relief Valves, Pilot operated Safety Relief Valve conform to API 520, API 526, API RP 527, ASME SEC VIII DIV I and IBR codes Set pressure and hydro tests as per specification or standard are carried and provided. FLUIDYNE manufactures following types of Safety Valves and Safety Relief Valves